VTB1012BH - Si PD, TO-46, 1.6mm2, IR Filter
The VTB1012BH is a silicon photodiode in a hermetic TO-46 flat window package. It has a built-in IR rejection filter to limit the response into the visible portion of the spectrum and exhibits a very high shunt resistance and low dark current.
The VTB1012BH silicon photodiode is designed in a hermetic TO-46 flat window package having a 1.6 mm2active area, as well as a built-in IR rejection filter to limit the response into the visible portion of the spectrum.
These photodiodes are primarily intended to be used in photovoltaic mode but may be used with a small reverse bias. They have also been designed to exhibit very high shunt resistance, a characteristic which leads to low offsets when used in high gain trans-impedance op-amp circuits.
Features & Benefits:
- Visible spectral range
- 1%-2% linearity over 7 to 9 decades
- Very low dark current
- Very high shunt resistance
- RoHs compliant
必威平台怎么样应用程序:
- Interior and exterior light control and light switching
- Automotive headlight dimmer
- Display contrast control
- Energy conservation
Active area = 1.6 mm2
Short Circuit Current = Minimum 0.8 µA at 100 fc, 2850K
Dark Current = Maximum 100 pA at 2 V Reverse Bias
Junction Capacitance = Typical 0.31 nF at 0 V Bias
Spectral Range = 330 nm to 720 nm
Peak Spectral Response = 580 nm
Sensitivity at peak Wavelength = Typical 0.29 A/W
Angular Response = ±35 Degrees at 50% Response
Active area = 1.6 mm2
Short Circuit Current = Minimum 0.8 µA at 100 fc, 2850K
Dark Current = Maximum 100 pA at 2 V Reverse Bias
Junction Capacitance = Typical 0.31 nF at 0 V Bias
Spectral Range = 330 nm to 720 nm
Peak Spectral Response = 580 nm
Sensitivity at peak Wavelength = Typical 0.29 A/W
Angular Response = ±35 Degrees at 50% Response