OmniCure UV LED Light Meter
UV Radiometer and Calibration Kit for the OmniCure LX500
PART/ LED Radiometer

Emnicure LX500 LED紫外线辐射计和校准套件

The OmniCure®LED Light Meter offers the ability to accurately measure power and irradiance from an OmniCure UV LED curing system, or any other UV LED source, directly at the cure site. It is specially designed to allow manufacturers the ability to select specific wavelengths for measurements. When used with our sensor calibrated with a near monochromatic source, the LED Light Meter eliminates the potential for inaccuracies in measurement that would normally occur due to the narrow spectral distribution of a UV LED source.

辐射测量是测量来自a的光输出的必要技术UV curing systemin order to maintain a repeatable process. OmniCure offers a beam positioning that when combined with our LED Light Meter (LM2011) and a precise alignment fixture, it allows users to efficiently measure the peak irradiance accurately and consistently on every measurement in an assembly manufacturing environment.

Based on the requirements of your manufacturing process, OmniCure offers two options for calibrating light output in irradiance (W/cm2) or total power (W) which includes the OmniCure LS100 (irradiance) or LS100P (power) sensor with our Beam Position Kit to achieve unmatched control and repeatability without the need for additional hardware.

Key Benefits of the OmniCure Beam Positioning Kit:
  • Consistent measurements by accurately positioning the beam on the detector sensor
  • Reduction in calibration time and cost with its easy-to-use alignment and setup
  • 消除对昂贵和庞大的对准工具的需求

The ability to accurately measure and calibrate light intensity in LED UV spot curing is challenging for the UV assembly manufacturer and is a critical piece to controlling a UV curing process. UV measuring systems are essential for determining peak irradiance by capturing the narrow beam at the center of the detecting sensor with the exact focal height. By combining an accurate radiometer with a precise alignment fixture, users are able to accurately and consistently measure the peak irradiance on every measurement in an assembly manufacturing environment.

    Spectral Sensitivity

    Selectable wavelengths programmable from 320-750 nm

    测量范围

    Irradiance: 50 mW/cm2to 25 W/cm2
    Power: 1 mW to 500 mW

    Accuracy

    +/- 10%

    解析度

    Irradiance: 1 mW/cm2
    Power: 1 mW

    Calibration Cycle

    One Year

    Battery Life

    Two Years, Typical (intermittent use)

    Operating Temperature Range

    Ambient to 40° Centigrade

    Certification

    Complies with IEC, Canadian and US Standards, RoHS compliant

    Functions

    Peak Hold, Power On/Off, λ nm (Wavelength selection), Power/Irradiance

    Traceability

    NIST and NRC Compliant

    Sensor Dimension (LxWxH)

    75 mm x 25 mm x 11.95 mm

    Meter Dimension (LxWxH)

    165 mm x 100 mm x 44 mm

    Spectral Sensitivity

    Selectable wavelengths programmable from 320-750 nm

    测量范围

    Irradiance: 50 mW/cm2to 25 W/cm2
    Power: 1 mW to 500 mW

    Accuracy

    +/- 10%

    解析度

    Irradiance: 1 mW/cm2
    Power: 1 mW

    Calibration Cycle

    One Year

    Battery Life

    Two Years, Typical (intermittent use)

    Operating Temperature Range

    Ambient to 40° Centigrade

    Certification

    Complies with IEC, Canadian and US Standards, RoHS compliant

    Functions

    Peak Hold, Power On/Off, λ nm (Wavelength selection), Power/Irradiance

    Traceability

    NIST and NRC Compliant

    Sensor Dimension (LxWxH)

    75 mm x 25 mm x 11.95 mm

    Meter Dimension (LxWxH)

    165 mm x 100 mm x 44 mm

    Download asset:
    To download this item, please complete the form below.